What Causes Your AC to Spit Water and Why You Must Call Experts to Fix It

The Air Conditioner is a basic necessity in most households around the country. In particular, most people cannot live without the AC during the hot summer months. However, this non-stop usage of the AC may result in damages, wear and tear, and malfunctioning, all of which are bound to make it incredibly unpleasant for you to stay inside the house in the summer.

So, it is vital that you keep an eye out and spot any issues, such as extra water coming out of the AC unit, as it could lead to a more severe issue if left unattended. Your AC unit is designed to expel water produced by the evaporative process. But if this doesn’t happen, the water may leak out through other areas.

So, if you notice water leaking out of the air conditioner, the chances are that something is wrong. An experienced 24 hour AC repair professional will know which parts to replace to restore your unit to total efficiency.

This article explains why an AC may spit water and what you can do about it.

Reasons Why an AC May Spit Water

The compressor pumps refrigerant from the condenser coil inside your unit into the evaporator coil inside your home. Once there, as it passes through the coils, it will be exposed to heat and pressure. In this environment, it can form into liquid water. This liquid water will collect at the bottom of the evaporator coil and drain out through a small hose that leads to a pan outside the unit.

The following conditions can cause this process to go wrong, resulting in water leaking from your AC unit:

·  An Air Filter is Clogged with Dust or Debris

It is not uncommon to find a large amount of dust and debris on an air filter. It will prevent the AC unit from doing its job correctly, leading to the compressor overheating. Also, it can force the compressor to expel its trapped heat through the compressor housing. It will come out of one or more vents on top of your unit before any water is expelled.

· Leaking Valves

If you have leaking valves in your AC system, refrigerant can pressure up inside the compressor. The high pressure can spray out of the compressor housing without producing any water.

· The Refrigerant System is Dirty or Clogged

If the evaporator coil inside your home gets dirty or clogged, it may not be able to remove heat from the system properly. As a result, you will have poor evaporation and high pressure. It will all culminate in the compressor ejecting its heat through water spitting out.

· The AC Unit is Old or Worn Out

Like any piece of machinery, your AC unit will eventually start to wear down over time. If this is the case, it may not expel heat and pressure quickly enough for the pressures to stay below a critical level, leading to water spitting.

How Can an Expert Help?

There are several reasons why your AC may spit water. The good news is that an expert 24 hour AC repair technician can spot the problem from a quick inspection and recommend how to fix it.

Your technician will start by flushing the system with an acid treatment in almost any case. It will dissolve any mineral deposits that can lead to blockage or leaks in the system.

Then, they will check for corroded valves and other issues causing the problem. They may also clean your air filter and inspect it for dust build-up, thus making sure your evaporator coil is clear of debris.

Lois Reed